Model Number

JERRY-II

Parameters竊�
Two Parameters竊�PO2��ulse Rate.

Waveforms竊�
No Waveform.

Features竊�
1��Small, light, easy for carrying and handling.
2��Brightness LED displays, easy to read, and the brightness can be adjusted.
3��Build-in rechargeable Ni/MH battery, longtime operating time.
4��Audio and visual alarm, and alarm limit can be set.
5��Automatic Power-off.
6��Battery capacity indicator.

Applications竊�
Pulse Oximeter can be applied in the hospital? operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Standard Packing List竊�
1. Pulse Oximeter main unit 1pc
2. Adult finger SpO2 sensor 1pc
3. AC power adaptor 1pc
4. The operator? manual 1pc

Selectable Accessory竊�
Child finger/toe SpO2 sensor

Specifications竊�/p>

1. General
Monitoring Parameters: SpO2��R��ulse strength
Signal sockets竊�pO2 socket��daptor socket

2. Display screen
Type: Red LED
Display area: 56mm?6mm
Size: 120mm?3mm?2mm
Weight: 300g竊�ot include probes and adaptor竊�/p>

3. Features
Audio and visual alarm: The speaker sounds the alarm and the parameter? measurement flashes on the screen.
Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.
Power saving: The monitor will automatic shut down when no monitoring for 3 minutes.

4. Electrical specifications
Working Voltage: D.C. 6.0V節�.C. 9.0V.
AC power adaptor
Input: AC 100 V節�40V, 50/60Hz, 0.7A
Output: 8V D.C., 800mA
Internal battery
Type: 2Ahr/6V Ni/MH rechargeable battery
Run Time:15-hour continuous operation with a new, fully charged battery (environment temperature is 25°C)
Recharge time: 10 hours

5. Parameter Specifications
SpO2
Patient: Adult, child
Range: 35 - 99%
Resolution: 1 %
Accuracy: ±2 %(70% - 99%),
PR
Range: 0~250bpm
Resolution: 1bpm
Accuracy: ±2bpm